Quick answer
Structural Engineering Services supports Revit projects worldwide with revit bim modeling, commercial building steel design, navisworks model review & clash detection, structural design services — delivered by senior engineers on licensed software to international codes.
- Publisher
- Autodesk
- Discipline
- Structural BIM modelling & documentation
- Licensing
- Commercial seats, in-house only
Capability at a glance
Our Revit bench strength
Every figure below is what we run in production — licensed seats, supported versions and the scale we deliver at, so you can size us against your package before you enquire.
12
Licensed seats
Revit within the Autodesk AEC Collection
2019–2025
Versions supported
We work in your version to avoid forced file upgrades
LOD 350
Typical delivery maturity
LOD 400 where fabrication-level detail is contracted
40 links
Largest federation
Multi-discipline model set coordinated per cycle
Weekly
Coordination cadence
Model issue and clash cycle on live projects
Deliverables
What we produce in Revit
A Revit deliverable is judged on coordination and consistency: does the model match the sheets, do the schedules match the model, and does it federate cleanly with everyone else's.
Scope your deliverablesLOD 300–400 structural model
Framing, columns, slabs, walls, foundations and connections modelled to the agreed LOD with correct levels, grids and shared coordinates.
Coordinated drawing set
Framing plans, elevations, sections, details and sheets generated from the model, so one model change propagates everywhere at once.
Rebar modelling & schedules
3D reinforcement in concrete elements with bar bending schedules, and congestion resolved in the model rather than on site.
Parametric family creation
Custom structural families — connections, embeds, precast units, proprietary products — built parametric and schedule-ready.
Analytical model & links
A clean analytical model exchanged with STAAD.Pro through ISM, so the design model and the BIM model stay in step.
IFC & coordination exports
IFC 2x3 or IFC4 and NWC issued for federation, with classification, naming and coordinates matching the project BEP.
Interoperability
Revit file formats we work with
Revit is a hub for multi-discipline building work. The exchanges below are the ones that break when they are not set up deliberately — especially coordinates and IFC mapping.
| Format | Direction | How we use it |
|---|---|---|
| .rvt model & links | Both ways | Architectural and MEP models linked in; the structural model issued out on the project's exchange cycle. |
| IFC 2x3 / IFC4 | Both ways | Open-BIM exchange with Tekla and non-Revit disciplines, with mapping tables agreed up front. |
| NWC | We deliver | Published to Navisworks for clash detection, 4D sequencing and design review. |
| DWG / DXF | Both ways | Legacy backgrounds in; sheets and 2D extracts out for contractors working in CAD. |
| ISM repository | Both ways | Analytical geometry round-tripped with STAAD.Pro so member sizes stay synchronised. |
| Schedules to Excel / CSV | We deliver | Member, rebar and quantity schedules extracted for estimating and procurement. |
| Point cloud (RCP / RCS) | We import | Scan-to-BIM for refurbishment, with the model built against measured reality. |
Working in a format that is not listed? Send a sample file with your enquiry — we confirm every exchange route before kick-off rather than discovering it at issue.
How we work
Our Revit workflow
Our process is built around catching problems before they reach your reviewer, so the checking stages are fixed, not optional.
- 1
BEP & template setup
Naming, LOD, worksets, shared coordinates, levels and grids are agreed against the BIM execution plan before modelling starts.
- 2
Model authoring
Structure modelled by zone and level with worksharing, keeping the model navigable rather than one monolithic file.
- 3
Family development
Project-specific families built parametric, carrying the data parameters the schedules and IFC export will need.
- 4
Discipline coordination
Regular federation with architecture and MEP, clash cycles run in Navisworks and resolutions tracked to closure.
- 5
Model audit
Quality gateWarnings cleared, model health and file size checked, naming and classification audited, and an IFC round-trip tested before issue.
- 6
Documentation
Views, annotation, schedules and sheets produced from the model with view templates enforcing graphic consistency.
- 7
Issue & handover
RVT, IFC, NWC and the PDF sheet set issued together with a model-status report noting LOD and known exclusions.
One stage is a formal quality gate — work does not move forward until a senior engineer signs it off, which is why revisions after issue stay rare.
Choosing a platform
When Revit is the right choice
The right software is the one that produces your deliverable with the least rework downstream. This is the call we would make on your scope.
Choose Revit when
- A building project where the client's BEP calls for a Revit deliverable and federated coordination.
- The structural model must stay consistent with architecture and MEP through many design revisions.
- Schedules, quantities and rebar need to come out of the model rather than being counted by hand.
- Documentation volume is high and sheet-level consistency across hundreds of views matters.
We would use something else when
Still unsure? Send the drawings and the deliverable you need — we will tell you which platform we would run it on, and why, before quoting.
Relevant services
Our Revit services
Revit BIM Modeling
Creating coordinated Revit structural BIM models for building projects.
ExploreCommercial Building Steel Design
Designing and detailing steel frames for offices, malls, hospitals and high-rise commercial buildings.
Explore
Navisworks Model Review & Clash Detection
Federating multi-discipline models and running clash detection and review sessions.
ExploreStructural Design Services
Developing safe, economical structural schemes from concept to issued-for-construction drawings.
ExploreDirectory
Revit work by market
Pick the market your project is built in. Every page sets out the governing codes, units and delivery window we work to there.
8 markets
Start your project
Send your drawings. Get a quote in 24 hours.
Free, no-obligation proposal from a senior engineer.