Our services
60+ engineering services under one roof
Steel detailing, structural analysis, piping & stress, static equipment, skid packages, FEA and BIM — all delivered by one coordinated team.
20 services
Steel Structures & Detailing
Tekla-based 3D modeling and fabrication-ready steel detailing for every structure type.
Steel Detailing Services
Converting engineering design drawings into precise fabrication and erection documents that shops can cut, drill and weld from without guesswork.
Explore
Structural Steel Detailing
Producing coordinated shop, assembly and erection drawings for beams, columns, bracing and connections.
ExploreTekla 3D Modeling
Building a fully detailed, clash-free Tekla Structures model from which every drawing, report and CNC file is generated.
ExploreFabrication & Shop Drawings
Preparing single-part, assembly and GA drawings with full dimensions, weld symbols and bolt data.
Explore
Steel Erection Drawings
Creating erection and anchor-bolt plans that show site crews exactly where and in what sequence each member goes.
ExploreBOQ & Material Take-off
Extracting accurate steel tonnage, plate, bolt and paint-area quantities directly from the 3D model.
Explore
Pre-Engineered Building (PEB) Design
Designing and detailing tapered portal frames, purlins, girts and bracing for economical PEB warehouses and factories.
Explore
Industrial Building Design
Engineering heavy industrial buildings with crane girders, mezzanines and equipment loads.
Explore
Commercial Building Steel Design
Designing and detailing steel frames for offices, malls, hospitals and high-rise commercial buildings.
Explore
Pipe Rack Design
Analysing and detailing main and secondary pipe racks with pipe, thermal, wind and seismic loads.
Explore
Equipment Support Structures
Designing platforms and supports for vessels, exchangers, pumps and rotating equipment.
Explore
Offshore Platform Structures
Modeling and detailing jackets, topsides, modules and offshore skids to offshore standards.
Explore
Transmission Tower Design
Detailing lattice transmission towers with member schedules, bolt lists and erection marks.
Explore
Communication Tower Design
Designing telecom lattice and monopole towers for antenna, wind and ice loads.
Explore
Steel Staircase & Handrail Design
Designing standalone and supported steel staircases, ladders, handrails and platforms.
ExploreFactory Shed Design
Delivering cost-optimised steel shed designs with roof trusses, cladding supports and crane runways.
Explore
Storage Tank Dome Roof Design
Modeling and detailing geodesic and framed dome roofs for large storage tanks.
Explore
Long-Span Roof Structures
Engineering trusses, space frames and long-span roofs for stadiums, hangars and halls.
ExploreProcess Plant Structures
Designing multi-level process structures, technological platforms and access steel.
Explore
Loading Ramps & Industrial Platforms
Designing loading ramps, man-lift cages, walkways and maintenance platforms.
Explore8 services
Structural Analysis & Design
Code-compliant analysis, member design, connection and foundation design.
Structural Engineering Services
Delivering end-to-end structural analysis, design and detailing for steel and industrial structures.
ExploreStructural Analysis Services
Verifying strength, stability and serviceability of structures under all governing load combinations.
ExploreSTAAD.Pro Analysis & Design
Building STAAD.Pro models and producing code-checked member design for steel structures.
ExploreSteel Connection Design
Designing shear, moment, bracing and base-plate connections with full calculation sheets.
Explore
Foundation Design
Designing isolated, combined, mat and equipment foundations with anchor-bolt checks.
ExploreStructural Design Services
Developing safe, economical structural schemes from concept to issued-for-construction drawings.
ExploreSeismic & Wind Load Analysis
Evaluating structures for site-specific seismic and wind actions per local codes.
Explore
Lifting & Rigging Calculations
Calculating lifting lug, spreader and package lifting loads for safe installation.
Explore10 services
Piping Design & Stress
3D piping, layouts, isometrics and CAESAR II stress analysis for process plants.
Piping Design Services
Developing complete piping engineering from layout and routing through to isometrics and BOM.
Explore
Pipe Stress Analysis
Checking piping systems for sustained, thermal and occasional loads, nozzle loads and support reactions.
ExploreCAESAR II Stress Analysis
Modeling and analysing critical lines in CAESAR II with full stress and load reports.
ExploreCADWorx 3D Piping Modeling
Producing intelligent spec-driven CADWorx piping models for plants and skids.
Explore
Piping Isometric Drawings
Generating dimensioned piping isometrics with weld, spool and material information.
ExplorePiping Layout & Routing
Optimising plot plans, equipment layout and pipe routing for safety, access and cost.
ExplorePipe Support Design
Designing and detailing standard and special pipe supports, shoes, guides and anchors.
ExplorePiping Thickness Calculation
Calculating wall thickness and pressure design per ASME B31 for every line class.
ExploreValve Datasheets & Piping BOM
Preparing valve datasheets, valve lists and complete piping bills of material.
ExplorePiping Spool Fabrication Drawings
Splitting systems into fabrication spools with cut lengths and weld maps.
Explore10 services
Static Equipment Design
Mechanical design of pressure vessels, heat exchangers, tanks and stacks.
Pressure Vessel Design
Designing separators, drums, reactors and columns to ASME, EN or PD codes.
ExplorePV-Elite Vessel Design
Performing PV-Elite calculations for shells, heads, nozzles, saddles and skirts.
ExploreASME Section VIII Design
Providing Div 1 and Div 2 design-by-rule and design-by-analysis for pressure equipment.
Explore
Heat Exchanger Mechanical Design
Designing floating head, fixed tubesheet, U-tube, stacked and kettle exchangers per TEMA.
Explore
Storage Tank Design (API 650)
Designing vertical, horizontal, fixed and floating roof tanks to API 650 and related codes.
ExploreSilo, Bin & Hopper Design
Engineering silos, bins and hoppers for bulk solids storage and discharge.
Explore
Chimney & Stack Design
Designing self-supported steel chimneys and stacks for wind, seismic and thermal loads.
ExploreReactor & Jacketed Vessel Design
Designing reactors, jacketed and limpet-coil vessels with agitator loads.
ExploreSeparator & Scrubber Design
Designing inlet separators, knock-out drums, scrubbers and filters for oil & gas.
ExploreStatic Equipment Design
Delivering design and analysis for the full range of static process equipment.
Explore4 services
Skid Package Engineering
Complete design of modular skids — vessel, piping, structure and lifting.
Skid Package Design
Engineering complete modular skids — vessels, piping, structure, lifting and foundations.
ExploreChemical Injection Skid Design
Designing chemical and corrosion-inhibitor injection skids for upstream facilities.
ExploreFilter & Coalescer Skid Design
Designing cartridge, multimedia, gas and coalescer filter packages.
ExploreMetering & Manifold Skid Design
Designing metering, manifold and remote-station skids with piping stress checks.
Explore5 services
Finite Element Analysis
Advanced simulation on ANSYS Mechanical Enterprise for critical components.
FEA Analysis Services
Simulating complex components to find stresses, deformation and failure risks before fabrication.
ExploreANSYS FEA Services
Running linear, non-linear, thermal and modal analyses on ANSYS Mechanical Enterprise.
ExploreBuckling Analysis
Evaluating linear and non-linear buckling of shells, columns and thin-walled structures.
ExploreFitness-for-Service Assessment
Assessing damaged or corroded equipment per API 579 to extend safe operating life.
ExploreNozzle Load & Local Stress FEA
Verifying nozzle junctions and local attachments beyond WRC 107/297 limits.
Explore5 services
CAD, BIM & Drafting
Detail engineering, BIM modeling and model reviews across all disciplines.
AutoCAD Drafting Services
Producing clean, standards-compliant 2D engineering drawings in AutoCAD and BricsCAD.
ExploreRevit BIM Modeling
Creating coordinated Revit structural BIM models for building projects.
ExploreNavisworks Model Review & Clash Detection
Federating multi-discipline models and running clash detection and review sessions.
ExploreAutodesk Inventor 3D Design
Modeling machines, equipment and skids in Inventor with fabrication drawings.
Explore
Engineering Design Services
Providing multidisciplinary engineering design support as an extension of your team.
ExploreStart your project
Send your drawings. Get a quote in 24 hours.
Free, no-obligation proposal from a senior engineer.