Quick answer
Seismic & Wind Load Analysis covers evaluating structures for site-specific seismic and wind actions per local codes. Done properly, it follows AISC 360, ASCE 7, EN 1993 and produces analysis model & load combinations that a fabricator or reviewer can use without rework. Structural Engineering Services delivers seismic & wind load analysis to clients in 40+ countries with a senior-engineer review on every package.
What seismic & wind load analysis actually includes
Seismic & Wind Load Analysis is the discipline of evaluating structures for site-specific seismic and wind actions per local codes. In practice a complete scope covers the full chain from design inputs to construction-ready output, not just a single drawing or calculation.
A typical seismic & wind load analysis package from our team includes: analysis model & load combinations, design calculation report, connection design sheets, foundation load & design report. Each deliverable is produced on licensed STAAD.Pro, RAM Connection, Foundation Advanced and passes an internal checker review before it reaches you.
How the work is delivered, step by step
Most engagements follow the same five-stage flow, whether the package is a single drawing or a multi-month frame agreement.
- Share inputs — design drawings, specifications and the project schedule.
- Free quote in 24 hours — fixed lump-sum, per-tonne, per-drawing or hourly.
- Model & engineer — built on STAAD.Pro to AISC 360.
- Review & approve — internal check, then your comments closed fast.
- Issue for construction — analysis model & load combinations and design calculation report issued with revision control.
Which codes and standards govern seismic & wind load analysis
The governing standard depends on where your project is built. Our teams work daily to AISC 360, ASCE 7, EN 1993, IS 800, ACI 318 and to client specifications such as Shell DEPs and major operator standards.
Getting the code basis agreed at kick-off is the single most effective way to avoid late-stage rework — it fixes load combinations, material grades, tolerances and documentation format before modeling starts.
When you need it — and when you don't
You need professional seismic & wind load analysis whenever the output feeds fabrication, regulatory review or a design-responsibility handover. Early concept sketches and feasibility studies can be lighter, but anything issued for construction should carry a checked, code-referenced package.
If you are unsure which level of detail your project needs, send us your inputs — a senior engineer will scope it honestly, even if that means telling you a smaller package will do.
What Is Seismic & Wind Load Analysis? A Complete Guide: FAQ
What is seismic & wind load analysis?
Seismic & Wind Load Analysis covers evaluating structures for site-specific seismic and wind actions per local codes. Done properly, it follows AISC 360, ASCE 7, EN 1993 and produces analysis model & load combinations that a fabricator or reviewer can use without rework. Structural Engineering Services delivers seismic & wind load analysis to clients in 40+ countries with a senior-engineer review on every package.
Which software is used for seismic & wind load analysis?
We deliver on licensed STAAD.Pro, RAM Connection, Foundation Advanced and issue native files plus PDF, DWG and IFC on request.
Which standards do you follow for seismic & wind load analysis?
We work to AISC 360, ASCE 7, EN 1993, IS 800, ACI 318, plus client specifications such as Shell DEPs and major operator standards.
How long does a seismic & wind load analysis package take?
Small packages are typically delivered in 3–7 working days; larger scopes are split into phased submissions agreed at kick-off.
How do I get a quote for seismic & wind load analysis?
Send your drawings or scope through our quote form — a senior engineer reviews them and returns a fixed-price proposal within 24 hours, free and without obligation.